Installation steps for Custom Cut Static Cling Window film<br /><br />Visit Our Website To Learn More:<br />https://www.greenfilmusa.com/<br /><br />===============================================================<br /><br />This video shows how to install Static Cling Window Film yourself using Greenfilm's residential window film steps by steps.<br /><br />This video shows how to install Static Cling Window Film yourself. Here we use Greenfilm's residential window film steps by steps.<br /><br />Installation<br /><br />Before Installation: <br />Make sure all windows are clean and free of debris/dust. You can clean the window with the solution and squeegee or scraper to remove the dust on the window. <br /><br />Step 1: <br />Place dry film onto the window. If the film has stuck to itself, place dry film onto the window and gently pull until flat. <br /><br />Step 2: <br />Spray solution generously on both sides of the film. <br />Tip: Lift the top edges of the film and apply the solution. <br /><br />Step 3: Squeegee the solution starting from the center to all edges. <br />If any bubbles remain, you can spray and squeegee again. <br />Be sure to use the squeegee on wet film to prevent damage to the film.<br />Tip: Before trimming, squeegee the edge of the window to make sure it does not move while trimming. <br /><br />Step 4: Press the edge of the window using the cutting stick and trim excess film with cutting knife. <br />Final Step; Spray the solution onto film once more. Then cover squeegee with the napkin and apply firm pressure to ensure all edges are flat and solution are all pushed out. <br /><br />Removing & Storing <br />Grab a corner of the film and pull gently to remove the film from the window. Place film on white paper and roll for storage. <br /><br />Contact Us:<br />https://www.greenfilmusa.com/contact/<br /><br />Email Us:<br />info@greenfilmusa.com<br /><br />Call Us:<br />(972) 247-1176<br />
